Infusion System "First Aid" Sterile with Needle 21G (0.8mm x 40mm) for Single Use

Description:

• The infusion system (device for fluid infusion) for single use is intended for intravenous administration of infusion solutions, as well as for infusing liquid medications and solutions into the blood of a human or animal from polymer containers.
• For intravenous infusion of solutions.
• Plastic needle for piercing stoppers.

Instructions for Use:

1. Inspection:

   • Check the integrity of the packaging.
   • Ensure the product is not expired.
   • Make sure there are no damages on the protective cap.

2. Preparation:

   • Open the package and take out the infusion set.
   • Close the flow regulator.
   • Insert the filter tip into the soft seat of the intravenous infusion needle and secure firmly.

3. Sterilization Procedure:

   • Insert the stopper-piercing device into the bottle (bag) with the solution according to the sterilization procedure.

4. Solution Preparation:

   • Carefully open the flow regulator and turn the drip chamber upside down.
   • Wait until the solution fills the drip chamber two-thirds full.
   • Hang the drip chamber.

5. Filling the Filter:

   • Turn the solution filter upside down.
   • Wait until the drip chamber is filled with the solution.
   • Release the air and close the flow regulator.

6. Administration:

   • Remove the protective cap from the needle.
   • Insert the needle into the vein according to the sterilization procedure.
   • Ensure the blood outflow device and the infusion needle are at the same level when inserting the needle.

7. Flow Regulation:

   • Slowly open the flow regulator after the blood outflow.
   • Secure the needle's position with a rubber band.

8. Adjusting Flow Rate:

   • Use the regulator to ensure the required flow rate of the solution.
   • If necessary, connect an additional container at the supply point to increase the solution amount.

Components:

• Stopper-piercing device with an integrated air valve and air filter.
• Transparent reservoir with an integrated liquid disk filter.
• Long flexible tube with a roller flow regulator.
• Latex port for additional injections.